Unidirectional and Bi - Directional  Reinforcements are available under the HinFab Brand name. Aerial weights from 150 GSM to 1000 GSM and widths up too 1.5m are available for most standard configurations. A wide variety of reinforcing fibers such as Carbon, Glass, Aramid and combination thereof  are available.
Available in range of fiber Counts from 3K to 50K and types from Standard Modulus to High Modulus PAN based carbon fibers. Aerial weights from 150 GSM to 1000 GSM and widths available up to 1300 mm.
Product CodeFiber TypeWeave StyleAerial WeightFilamentsThickness (mm)Download
HCP160BDPLain1603K0.16 Download
HCP200CBDPLain2003K0.22 Download
HCP200HBDPLain2003K0.22 Download
HCT200CBD2/2 Twill2003K0.22 Download
HCT200HBD2/2 Twill2003K0.22 Download
HCP240BDPLain2403K0.25 Download
HCT240BD2/2 Twill2403K0.25 Download
HCP280BDPLain2803K0.30 Download
HCT280CBD2/2 Twill2803K0.30 Download
HCT280HBD2/2 Twill2803K0.30 Download
HC5S280BD5 Ends Satin2803K0.28 Download
HC8S380BD8 Ends Satin3803K0.39 Download
HCP301BDPLain3006K0.32 Download
HCT301BD2/2 Twill3006K0.32 Download
HCP382BDPLain38012K0.40 Download
HCT382BD2/2 Twill38012K0.40
HCP402BDPLain40012K0.44 Download
HCP422BDPLain40012K0.44 Download
HCT422BD2/2 Twill42012K0.44 Download
HCU160UDUD1603K0.18 Download
HCU200UDUD2003K0.24 Download
HCU232UDUD23012K0.26 Download
HCU302UDUD30012K0.34 Download
HCU403UDUD40024K0.45 Download
HCU453BDUD45024K0.50 Download
HCU503UDUD50024K0.60 Download
HCU603UDUD60024K0.70 Download

HinFab® - Uni-Directional Fabrics

These Fabrics have fiber in just one direction and then stabilized with a fill fiber in the weft direction. Uni Directional fabric are ideal for carrying loads in one direction, they provide excellent material properties.

HinFab® - Bi Directional - Plain, Twill, Satin,Leno, Basket etc

Woven reinforcements are a result of interlacing a Warp (0) and Weft (90) thread. . They provide strength and stiffness in two directions, good handling characteristics and drapeability.

HinFix® - Heat Set – Woven and UD Fabrics

HinFix® reinforcements are designed to maintain the weave pattern of a carbon fabric even when the fabric is handled or cut into smaller pieces. This is particularly useful for applications that must maintain a strong aesthetic appearance.

HinForm® - Bonded/Weave Stabilized – Woven and UD Fabrics

HinForm® reinforcements are designed to allow the user to make preforms before the matrix system is introduced in the molding process. The reinforcements are treated with a very light layer of special resin which can be processed at low temperatures.